The arrows should face down, with the pin destined to be removed over one of the small holes in the tool’s base. Step 3: Grab your watch tool kit and select a pin punch and the small hammer. Generally, the pins go back in the opposite direction when replacing them. The direction they point in is the way the pins securing each link needs to come out. Step 2: Remove the watch and look at the underneath of the strap. This gives you an idea of whether two, four, or six links need to come out. With the clasp done up, pinch it at the side and see how many links gather together. Step 1:Put the watch on and assess how many links need to be removed before it fits properly.
How to adjust the strap Andy Boxall/Senior Writer After all, you’re trying to save the expense of taking it to a professional.
Make sure you’ve got plenty of time, as by rushing you run the risk of damaging the pins, links, or the watch itself. Don’t do it in the middle of the night, or anywhere people want quiet because hammering the pins out is a surprisingly noisy process. You need a flat surface and lots of light. You’ll need good lighting and a smooth table or countertop. You should also consider using a receptacle of some kind to store the links and pins you extract from the watch to ensure you don’t misplace them. This isn’t essential, but sometimes the pins have a habit of getting stuck, and you’ll need a strong grip to get them out. The only other tool you may need is a pair of needle-nose pliers. Either system will do the job, but we’ll focus on the hammer-and-pin-tool system here. While these look easier to use, they can be more complicated to line-up during the pin removal process, and the pins are easier to lose straight after removal.
There are other band adjustment options available with a winder attached to the tool, instead of using a little hammer. Inside the box will be a selection of pin punches, a little hammer, and a watch tool for securing the band. Make sure you pick up a kit that includes a watchband holder, as this will make the job much easier. Amazon store, but there are many other options. For our demo here, we are using the SRXWO Watch Band Link Remover, purchased from Amazon U.K. However, you also don’t need to buy equipment that costs more than the watch. You can’t adjust the strap with a hairpin and the hammer you used to hang that picture. We’ll take you through everything you need to know - and the tools you’ll need handy - to remove links from your smartwatch so it fits snugly on your wrist. Chances are there are at least one too many chain links on the strap, but adjusting a metal link smartwatch isn’t as difficult as you might think - and doesn’t usually require a trip to the jewelers. No need to worry - it’s a common problem. If your wrists are on the smaller size, then you may find that your new smartwatch is dangling from your wrist and sliding up your forearm. There’s no such thing as a one-size-fits-all smartwatch.